• 新型PP熔喷料油性母粒,提高油性过滤检测效果
  • 本站编辑:银河1331会员登录发布日期:2021-03-24 14:58 浏览次数:

   塑伯S0511油性颗粒物过滤量提升母粒是针对大部分客户对于油性颗粒物过滤量要求(FFP2标准)推出的新产品。采用亲油性的配方工艺,均匀分散于PP(聚丙烯)载体中,成丝后对油性颗粒物具有同性相吸效应,对过滤量的提升与添加量成正比例(建议添加20%以下),随着添加比例增加,熔体流动性降低,故成型温度应同步提高。

   The oil particle filtration volume of plastic Bo s0511 is a new product for most customers to meet the requirements of oil particle filtration (FFP2 standard). The oil-friendly formula technology is used to disperse evenly in PP (polypropylene) carrier. After the filament is made, it has the same phase absorption effect on the oily particles. The filtration and the amount of the oil particles are increased in a positive proportion (it is suggested to add less than 20%). With the increase of the addition ratio, the melt fluidity decreases, so the forming temperature should be increased synchronously.

Copyright © 2018-2021 版权所有:银河1331会员登录 浙ICP备13008126号-1 All Rights Reserved 技术支持:玄圭互联